4
ASSEMBLY INSTRUCTIONS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble the product. .
Estimated Assembly Time: 45 ~ 60 minutes,
add an additional 20 minutes if field cutting and
drilling is required.
Tools Required for Assembly (not included): Stepladder, Phillips screwdriver, Flathead screwdriver,
Wirecutters, Pliers, Safety Goggles, Drill, Handsaw
Helpful Tools (not included): Wire stripper, Electrical tape
1. If you want to field cut the track section (F), mark the
track section (F) at desired length and remove end caps.
Take into consideration the length of the connectors to be
used if any.
Secure the track section (F) and with a blunt instrument tap
on the copper strip on interior buss bars until they are
dislodged. Work on the track section (F) end that will be
cut off and disgarded. Do not remove the buss bars.
Reattach the end caps with the interior buss bars in place
and cut the track section (F) at mark. Make sure the cut is
straight with no burrs.
With one end cap (GG) in place pull the copper strips out
and cut 3/8 in. off of each strip. Push the copper strips back
in and replace other end cap (GG) or make connection to
other track connector.
F
F
F
F
1
3/8 in.
3/8 in.
IMPORTANT SAFETY INSTRUCTIONS – READ AND SAVE
Lowes.com
When installing or using this track system, basic safety precautions should always be followed,
including the following:
a) Read all instructions
b) Do not install this track in damp or wet locations.
c) Do not install any part of a track system less than 5 ft. above the floor.
d) Do not install any fixture assembly closer than 6 in. from any curtain, or similiar combustible material.
e) Disconnect electrical power before adding in or changing the configuration of the track .
f) Do not pendant mount this track such as by stems or wires.
g) Do not attempt to energize anything other than the lighting track fixtures on the track. To avoid
shock, do not attempt to connect power tools, extention cords. appliances, and the like.
GG
GG
