![Project Source 16439-002 Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/project-source/16439-002/16439-002_manual_1614067003.webp)
SAFETY INFORMATION
CAUTION
• For use with “hbt” series track onl
y
.
• Save these instructions and refer to them when additions to or changes to the track configuration
are made.
• ELECTRICAL CONNECTIONS (Required Supply Circuit: 120
V
, 60Hz)
• Connect the white wire(s) from the fixture to the white wire of the supply circuit. Connect the
black wire(s) from the fixture to the black wire of the supply circuit. Connect the green (or bare
copper) colored wire to the grounding conductor of the supply circuit. Use U.L./CSA Listed wire
connectors suitable for the size, type and number of conductors. No loose strands or loose
connections should be present. Secure wire connectors with U.L./CSA Listed electrical tape.
• To ensure the success of the installation, be sure to read these instructions and review the
diagrams thoroughly before beginning.
• All electrical connections must be in accordance with local codes, ordinances, and the National
Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the
services of a qualified licensed electrician.
• This system is intended to be supplied by a single 120-volt branch circuit. Before you begin,
check circuit load.
• This system is to be mounted to an electrical junction box at a minimum of 6 ft. above ground
level and 6 in. from any combustible material. The box must be directly supported by the building
structure. Do not pendant mount such as by a cable or stem.
• Before starting the installation, disconnect the power by turning off the circuit breaker or by
removing the appropriate fuse at the fuse box. Turning the power off using the light switch is not
sufficient to prevent electrical shock.
• GENERAL: This system can be expanded upon by purchasing additional "HBT" series
components.
WARNING
• To avoid risk of electric shock or fire, do not modify this lamp, if any modification is made it may
render the product unsafe.
3
HARDWARE CONTENTS
Junction
Box Screws
Qt
y
. 2
Wire
Connector
Qt
y
. 3
AA
BB
Toggle
Bolt
CC
DD
Qt
y
. 2
W
ood
Screws
Qt
y
. 2
EE
Plastic
Anchors
Qt
y
. 2
FF
Suction
Cup
Qt
y
. 1
End Cap
Qt
y
. 2
Lowes.com
GG