Progressive Turf Equipment TDR-12, Руководство оператора и списки запасных частей

Страница: 30 / 70

27
BLADE SERVICING
Always observe proper lock-out procedures when performing
any maintenance work including changing or servicing the
blades. Always remove and retain the ignition switch key,
ensure parking brake is engaged, and block and or support
machine using equipment designed for the task.
Be sure deck safety locks are engaged when working on decks
in the raised position.
Use gloves when handling mower blades. Blades can be very
sharp.
Inspect blades before each use to determine that they are
mounted tightly and are in good condition. Replace any blade
that is bent, excessively nicked, worn or has any other damage.
Small nicks can be ground out when sharpening.
Use only original equipment blades when replacing worn or
damaged mower blades. They are made of special steel alloys
and subjected to rigid heat-treat and inspection requirements.
Substitute blades may not meet these specifications and MAY
BE DANGEROUS.
Combined with Progressive‟s high tip speed, the fixed High-Lift
blade „stands‟ grass blades up for a clean cut, even in damp
conditions or at high mowing speeds.