Progetti Rescue Life, Руководство пользователя, Страница: 52 / 76

Rescue Life User Manual vers. 3.0 Feb. 2015
46
Appendix 1
Error Code List & Definitions
If more than one error occurs during a single measurement, the higher numbered error code
will be displayed.
EC 1 Weak or no oscillometric signal
Corrective Action: Check that the cuff is in the correct position.
Check the patient.
Check that the cuff is properly tightened.
Check that there is no excessive clothing between the arm and the cuff.
Check that the correct size cuff is being applied.
EC 2 Artifact / erratic oscillometric signal
Corrective Action: The patient may have been moving too much.
Check that the cuff is in the correct position.
Check that the correct size cuff is being applied.
EC 4 Exceeded measurement time limit
Corrective Action: The patient may have been moving too much.
Check that the cuff is properly tightened.
Check that the cuff is in the correct position.
Check that the correct size cuff is being applied.
Check that there is no excessive clothing between the arm and the cuff.
EC 85 Pneumatic Blockage
Corrective Action: Check that the hose has no sharp bends or is pinched.
Check that the patient is not lying on the cuff.
Check that the cuff is in the correct position.
EC 86 BP reading terminated by user
Corrective Action: Check the patient.
Take another BP measurement.
EC 87 Inflate Timeout, Air Leak or Loose Cuff
Corrective Action: Check that the hose is connected to the system and the cuff.
Check that the cuff is properly tightened.
Check that the cuff is in the correct position.
C heckthatthe correctsize cu ff is beingapplied .
C heckthatthe cu ff is notleakingair.
C heckthatthe hose connections are notd amaged orloose.
EC 88 Safety Timeout