Progetti Rescue Life, Руководство пользователя, Страница: 27 / 76

Rescue Life User Manual vers. 3.0 Feb. 2015
21
SPEED DIAL USE
The Speed Dial allows to set the main parameters displayed in the right side of the screen.
Press the Speed Dial in order to highlight them. When a parameter has been selected, rotate
the Speed Dial for changing its value.
ENERGY Select defibrillation Energy from 1J to 230J.
MODE Select the Mode: manual (MANUAL), advisory (ADV) or semiautomatic (AED).
TRACE
Select ECG traces that the user choose to display or print. When the patient
cable is connected, traces I,II,III or aVR, aVL, aVF can be selected. When the
patient cable is disconnected, the ECG trace is acquired by defibrillation pads
(lead II).
SPEED
Select the speed of ECG traces (display and printer): 5mm/s, 10mm/s,
25mm/s and 50mm/s
GAIN
Select the ECG gain (display and printer): 2,5mm/mV, 5mm/mV, 10mm/mV,
20mm/mV and 40mm/mV.
ALARM
STATUS
Enable or disable the ECG heart rate alarm or the SpO2 alarm
OPERATIONAL SCREEN FEATURES
CHARGE STATUS (Energy):
When charge status bar is empty (gray color), the capacitor is not charged (0 joule).
By pressing the CHARGE key (when disposable pads are connected) or by pressing both
pushbuttons on the pads handle when standard pads are in use, the capacitor start to charge
the selected Energy level and the bar status becomes red indicating that the charging
procedure is on.
BATTERY STATUS:
Indicates the charging batteries status. If the level is below 50% connect the AC cord to start
charging the battery.
SpO2 DATA (OPTIONAL):
When the SpO2 sensor is connected, it indicates the oxygen saturation and the heart rate
acquired.