24
HOW TO USE AN ONBOARD WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on
page 21.
2. Select an onboard workout.
To select an onboard workout, press the Calorie
button, the Performance button, the Timed button,
or the Distance button repeatedly until the desired
workout appears in the display.
When you select an onboard workout, the displays
will show the maximum incline, the duration, the
distance, the maximum speed, and the name of the
workout. In addition, a pro
le of the speed settings
of the workout will appear in the matrix. If you se-
lect a calorie workout, the approximate number of
calories you will burn will appear in the name of the
workout.
3. Start the workout.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout. Hold
the handrails and begin walking.
Each workout is divided into segments. One speed
setting and one incline setting are programmed for
each segment. Note: The same speed setting and/
or incline setting may be programmed for consecu-
tive segments.
During the
workout, the
pro
le will
show your
progress.
The
ashing
segment of
the pro
le
represents the current segment of the workout. The
height of the
ashing segment indicates the ap-
proximate speed setting for the current segment. If
a new speed and/or incline setting is programmed
for the next segment, the speed and/or incline will
change when the next segment begins.
The workout will continue in this way until the last
segment of the pro
le
ashes in the display and the
last segment ends. The walking belt will then slow
to a stop.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories
that you burn will depend on various factors
such as your weight. In addition, if you manu-
ally change the speed or incline of the treadmill
during the workout, the number of calories you
burn will be affected.
If the speed or incline setting is too high or too low
at any time during the workout, you can manu-
ally override the setting by pressing the Speed or
Incline buttons;
however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button. The time will begin to flash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at 1 mph. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
4.
Follow your progress with the displays.
See step 5 on page 22.
5. Measure your heart rate if desired.
See step 6 on page 23.
6. Turn on the fan if desired.
See step 7 on page 23.
7. When you are finished exercising, remove the
key from the console.
See step 8 on page 23.
Current Segment
Содержание PFTL17112.0
Страница 5: ...5...
Страница 6: ...6 all STANDARD SERVICE PLANS...
