background image

9

HOW TO LEVEL THE EXERCISE CYCLE

If the exercise cycle rocks slightly on your floor, turn
one or both of the leveling feet under the rear stabiliz-
er until the rocking motion is eliminated.

HOW TO ADJUST THE HEIGHT OF THE SEAT  

For effective exercise, the seat should be at the proper
height. As you pedal, there should be a slight bend in
your knees when the pedals are in the lowest position.

To adjust the seat,
first turn the seat
post knob counter-
clockwise several
turns to loosen it.
Next, pull the knob,
slide the seat post
upward or down-
ward to the desired
position, and then
release the knob.
Move the seat post
upward or down-
ward slightly to
make sure that the
knob is engaged in
one of the adjust-
ment holes in the seat post. 
Then, turn the knob
clockwise to tighten it.

HOW TO ADJUST THE LATERAL POSITION OF
THE SEAT

To adjust the lateral
position of the seat,
first loosen the seat
knob a few turns.
Then, move the seat
forward or backward
to the desired posi-
tion, and firmly tight-
en the seat knob.

HOW TO ADJUST THE PEDAL STRAPS

To adjust the pedal
straps, press the
tabs on the sides
of the pedals and
adjust the pedal
straps to the
desired position. 

HOW TO ADJUST THE HANDLEBAR

To adjust the han-
dlebar, first turn the
indicated adjustment
handle counterclock-
wise to loosen it.
Note: The adjust-
ment handle works
like a spanner. Turn
the handle counter-
clockwise, pull it
away from the han-
dlebar, turn it clock-
wise, push it toward the handlebar, and then turn it
counterclockwise again. Repeat until the handlebar is
loose. Move the handlebar upward or downward to the
desired position and then retighten the handle.

Tab

Seat

Seat 

Post

Knob

Seat Post

Seat

Seat Knob

Seat Post

Strap

HOW TO OPERATE THE EXERCISE CYCLE

Adjustment

Handle

Содержание 780 Ekg Bike

























Отзывы: