4
ASSEMBLY
Assembly requires two persons.
Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the
included hex keys and your own a phillips screwdriver
, adjustable spanner
,
and rubber mallet
.
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page 22. The second number refers to the quantity used in assembly.
Note: Some small parts may have been
pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
M10 x 112mm Carriage Bolt (34)–4
Adjustment Bolt (20)–2
M10 x 88mm Button Screw (63)–1
M10 x 78mm Button Bolt (27)–2
M10
Washer (38)–6
M10 Split
Washer (70)–3
M10 Nylon
Locknut (29)–6
Frame Spacer (83)–1
M8 x 45mm Button Bolt (50)–4
M8 Nylon Locknut
(46)–4
Wave Washer
(95)–2
M8 x 25mm Patch
Screw (22)–2
M4 x 22mm
Screw (96)–2
M8.5
Washer (53)–2