7
REFITTING THE BATTERY
Slide the rear of the battery into
the battery compartment on
the base of the drone at an
angle of around 30
–
45
degrees.
Ensure the notch on the rear of
the battery slides under the
ledge at the rear of the battery
(See the diagram on the
previous page for location of
the notch).
While continuing to ensure the battery is
pushed up to the rear of the drone, with
the notch under the ledge, push down on
the front of the battery, so that it twists
into the compartment.
Ensure that the battery ‘clicks’ into place
and is locked in position before flight.
INSTALLING THE BATTERIES IN THE CONTROLLER
Remove the retaining screw from the top of the battery cover on the rear of the
controller. Unclip the battery cover and insert 4 x AAA batteries (Not Supplied),
making sure that the correct polarity is followed. Once the batteries are correctly
installed, the battery cover must be re-fitted.
