6
REMOVING THE BATTERY FROM THE DRONE
With the rear of the drone on a flat surface, slide
the two tabs on the side of the drown
downwards at the same time.
While both the tabs are pressed down, twist the
top of the battery (By the power button) out of
the drone. Please note this may take some force.
Once the top of the battery is free from the drone, it can then
be slid out of the drone following the direction of the arrow
to the left.
CHARGING THE BATTERY
Use only the supplied USB Li-Po charger to charge your battery.
To charge the
battery it must first be removed from the drone, following the instructions above.
Plug the charger into a USB socket, the LED on the charge will light up Red. Attach
the charger to the battery, the LED on the charger will start to slowly flash. When
the battery is fully charged the LED on the charger will turn off. Charging should
take around 4-5 hours. DO NOT leave the battery unattended whilst charging.
1
Power Button
2
Battery level indicator
3
Charging port
Notch
