Proficient Audio Systems M80, Инструкция по установке и эксплуатации

Страница: 97 / 108

97
TROUBLEShOOTING
PROBLEM SOLUTION
Remote Control
Remote does not control M80 a) Replace batteries in remote.
b) Confirm direct ‘line-of-sight’ from the remote to the IR
Sensor on the M80 Front Panel.
c) Block any bright light or high ambient light that may be
saturating the IR Sensor with light noise.
d) Confirm connection of external IR Receiver (if used).
iPod a) Confirm Proficient iPod Dock connection to M80 iPod Dock
Port.
XM a) Confirm XM Ready Tuner connection to M80 XM Port.
Zone 2
No Audio a) Confirm Zone 2 source analog line level audio connections.
b) Confirm source analog audio input selection in OSD Source
Setup. (If a digital audio input is also selected, it will be the
priority to the Main Room for Surround Mode processing.)
c) Confirm Zone PRE-OUT or OUT connections to an external
amplifier.
d) Confirm OSD Zone 2 Controls Setup.
e) Confirm Zone 2 speaker connections.
f) Confirm Zone 2 volume is turned up and un-muted.
g) Confirm Zone 2 source is selected, turned on and playing.
No Video a) Confirm Zone 2 source composite and/or S-Video
connections.
b) Confirm Zone 2 composite and/or S-Video connection to
Zone 2 Video Display.
c) Confirm proper Input is selected on the Zone 2 Video
Display.
d) Confirm composite or S-Video Input is selected in Setup
Menu
e) Confirm source is selected, turned on and playing.
No IR Control d) Confirm connection of Zone 2 IR Receiver (if used).
b) Confirm direct ‘line-of-sight’ from the remote to the IR
Sensor on the M80 Front Panel.
c) Block any bright light or high ambient light that may be
saturating the IR Sensor with light noise.
a) Replace batteries in remote.