Proficient Audio Systems M80, Инструкция по установке и эксплуатации

Страница: 38 / 108

38
CONNECTIONS
IR Single Flasher
w/red LED
DVD
Remote Control
FLASHERS
ST
ATUS IN
5-24V DC
IR
RCVR
12V DC
RE
G
U
LA
TE
D
FLASHERS
+12V GND ST OUT IR IN
IR Router
IR Router
Flasher Out
IR Power
Supply
IR Shelf Top
Receiver
IR IN 1
Mono Mini to
Mono Mini Cable
M80
Diagram 21
IR IN Connections with IR Flashers
IR IN/OUT Connections
The IR IN 1 & 2 jacks on the M80 Rear Panel allow direct connec-
tion to the Flasher Output of an IR control system. This allows the
M80 to be controlled when hidden in an equipment cabinet or
closet, or from another room. Using these jacks eliminates the
need for attaching an IR Flasher to the Front Panel of the M80.
The IR OUT jack can be connected to source components that
are equipped with compatible IR Control Input connections. This
eliminates the need for IR Flashers on these devices.
The two IR IN jacks are parallel so one can be used for a Main
Room IR control system and one can be used for a Zone 2 IR
control system or the Main Room and Zone 2 IR Receivers can
be connected in parallel to a single IR Router. The IR commands
from the M80 Remote and Zone 2 Remote are discrete for their
respective Zones so the IR systems do not need to be isolated.
Diagram 21 shows an application where the M80 IR IN 1 is con-
nected to a Proficient IR Control System. In this example an IR
Flasher is used on the DVD Player because it does not have an IR
Control Input. Additional Flashers can be added to control ad-
ditional sources.
Diagram 22 shows an application where the M80 IR IN 1 is con-
nected to a Proficient IR Control System. In this case, all of the
sources have compatible IR Control Inputs and are daisy-chained
for IR control without using IR Flashers.
M80
IR OUT
Mono Mini to
Mono Mini Cable
Source A
Rear Panel
Source B
Rear Panel
Remote Control
FLASHERS
ST
ATUS IN
5-24V DC
IR
RCVR
12V DC
RE
G
U
LA
TE
D
FLASHERS
+12V GND ST OUT IR IN
IR Router
IR Router
IR Power
Supply
IR Shelf Top
Receiver
Mono Mini to
Mono Mini Cable
Mono Mini to
Mono Mini Cable
Flasher OUT
IR IN 1
IR CONTROL IR CONTROL
Diagram 22 IR IN/OUT Connections with IR Control Inputs
Note:
Not all devices that feature IR Control Inputs will be compatible with the Remote IN/OUT connection on the M80. IR Control
Inputs typically receive IR signals that have had the carrier stripped but not all will be compatible. In some cases, IR Flashers will
have to be used.
To make M80 IR IN/OUT Connections:
1.
Using a mono mini-mini cable, connect the Flasher OUT on a Proficient IR Router to the IR IN 1 or 2 jack on the M80 Rear Panel.
2.
If using IR Flashers, connect the Flasher mini plug to a Flasher OUT on the IR Router. Attach the Flasher to the device being
controlled, over the IR eye on that device.
(Diagram 21)
Add additional Flashers as needed.
3.
If using source components that feature IR Control Inputs, using a mono mini-mini cable connect the IR OUT on the M80 Rear
Panel to the IR Remote IN jack on the device being controlled.
4.
To connect additional devices with IR Control Inputs, connect a mono mini-mini cable to the IR Remote OUT on Source A to
the IR Remote IN on Source B as shown in
Diagram 22.
Repeat
Step 4
as needed.