53
SPEAKER SETUP
Speaker Levels
These settings determine the output level of the individ-
ual speakers. (This is similar to ‘balance’ in a two-channel
system.) These settings assure that the audio output from
all speakers arrives at the same level in the Ideal Listening
Zone. The level setting can help compensate for less than
ideal speaker placement if it is not possible to position all
speakers at equal distances from the Ideal Listening Zone
as shown in
Diagrams 5 & 6
.
Adjust the output level to each speaker until all speakers
have the same volume. This will assure proper balance of
voice, music sound track and ambient sound to reproduce
surround and multichannel effects as created in the studio
and proper balance of synthesized surround effects.
Speaker Levels
< >
Front Left
Center
Front Right
Surround Right
Back Right
Back Left
Surround Left
-2 dB
+1 dB
0 dB
+3 dB
-3 dB
-2 dB
-1 dB
BSL
SL
SR
BSR
FL
FR
SW
C
Diagram 52
Speaker Levels (Balance)
Note:
The Surround and Back speakers in 5.1 and 7.1 systems do not always play. They typically provide environmental
sounds and music tracks for movies and TV program that are appropriately encoded for surround sound. Only adjust the Sur-
round and Back speaker levels if they are unusually loud or soft when playing relative to the Front and Center speakers.
Range:
+/- 12dB.
The values shown in
Diagram 52
are for example only.
1.
With the Speaker Setup Menu open,
Diagram 44
, press to move the highlight bar to the Speaker Levels line. Press .
The Speaker Levels screen will appear. Front left will be highlighted by default.
Diagram 52
2.
Speaker Level should be adjusted as referenced to the Test Tone generated by the M80. To activate the Test Tone, press
Test Tone on the M80 Remote.
3.
Press . The Front Left Window will become active.
4.
Press to select speaker level.
5.
When finished, press so the Front Left Window is no longer active and to save the setting.
6.
Press to move the highlight bar to the Center line.
7
. Repeat
Steps 3-5
for all speakers. (Adjust Subwoofer level using the level control on the sub.)
8.
When all speaker levels have been set, press to return to the Speaker Setup Menu.
9.
If continuing in Speaker Setup, press to move the highlight bar to Speaker Distance and proceed to the next section.
10.
To return to the OSD press again.
11.
To exit the OSD press Menu.
Содержание M80
Страница 1: ...Audio Systems M80 7 1 Channel Surround A V Receiver Installation User Guide ...
Страница 7: ...7 notes ...
Страница 107: ...107 notes ...
