Proficient Audio Systems M80, Инструкция по установке и эксплуатации

Страница: 85 / 108

85
OPERATING ThE M80
Press < to Return Press > to Advance
Setup
Menu
Zone 2
Controls
Tone
Controls
Source Setup
Speaker Setup
Amplifier Setup
Trigger Setup
Listening Mode Setup
Video Setup
Diagram 119
Setup Menu - Video Setup
BLU-RAY
Analog Audio Input
Digital Audio Input
Video Input
Speaker Setup
Resolution
Input Audio Format
Listening Mode
Volume
Trigger Out Audio 1
HDMI 1
HDMI 1
3/2.1
1080P 60Hz
Dolby TrueHD
Dolby TrueHD
-20 dB
Main
Diagram 120
Info Screen
Information Screen
The Information screen provides a snapshot summary of M80
settings for the currently selected source. This is a good place
to start if a source does not appear to be performing properly.
All current settings for connections, signal inputs and outputs,
Listening Mode and Volume will be displayed.
Diagram 120
1.
To activate the Information Screen, press the INFO button
on the M80 Remote. The Info screen will appear. This is a
non-interactive screen. No settings can be changed in this
screen.
2.
To close the Information Screen, press the INFO button
again or press Menu to directly open the OSD.
Analog Audio Input -
Indicates the Analog Audio Input
for the selected source as configured in Source Setup.
Digital Audio Input -
Indicates the Digital Audio Input for
the selected source as configured in Source Setup.
Video Input -
Indicates the Video Input for the selected
source as configured in Source Setup.
Speaker Setup -
Indicates the channel configuration of
the audio input signal for the selected source. In
Diagram
120
, the first number (3) indicates the Front Speakers (left,
center, right). The second number (2) indicates the Sur-
round Speakers (surround left, right). The ‘.1’ indicates an
LFE Subwoofer channel. This indicates a 5.1 audio signal.
As another example, 2/0.0 would indicate stereo.
Resolution -
Indicates the current Resolution to Display
output. If the setting is set to Auto, Resolution will show
the actual output resolution.
Input Audio Format -
Indicates the Audio format of the
incoming audio signal. This is a good place to look when
selecting Listening Modes. The Input Audio Format has a
direct affect on which Listening Modes are available.
Listening Mode - Indicates the currently selected Listening Mode.
Volume - Indicates the current Volume setting.
Trigger Out - Indicates the system Trigger Out setting.
Note: The Information Screen cannot be opened while Tuner or iPod is the selected source.
Reset
To reset the M80 to factory defaults, with FM Tuner selected, press and hold the Surround button on the M80 Front Panel for five
seconds. This will delete any user programmed settings including Tuner Presets, Speaker Settings and Listening Mode
preferences.
Firmware Version
To view the M80 firmware version, with AM Tuner selected, press and hold the Surround button on the M80 Front Panel for five
seconds. The firmware version will appear on the Front Panel Display for five seconds.