PROEL AE604, Руководство по эксплуатации и установке

Страница: 31 / 48

31
•
Paging mic gain:  MIC/LINE
Configuration of the input gain of the integrated paging microphone input in microphone input (high
gain) or line input (low gain) mode.
To change the parameter, simply press OK to access the configuration screen, select the desired setting
using the UP and DOWN arrows. To confirm the configuration, press OK, to cancel the changes, press
BACK.
To change the configuration of the microphones it is necessary to have access level 3, otherwise a screen
will be displayed asking to be authenticated to perform this operation.
The LINE OUT MODE sub-menu allows you to view and configure the audio content that will be played
or not on the line-out line output integrated in the system.
•
Voice alarma msg:  ENABLED/DISABLED
Enable or disable the playback of voice alarm messages.
•
Paging line 1:  ENABLED/DISABLED
Enable or disable the reproduction of paging messages addressed to line 1.
•
Paging line 2:  ENABLED/DISABLED
Enable or disable the reproduction of paging messages addressed to line 2.
•
Paging line 3:  ENABLED/DISABLED
Enable or disable the reproduction of paging messages addressed to line 3.
•
Paging line 4:  ENABLED/DISABLED
Enable or disable the reproduction of paging messages addressed to line 4.
•
BGM music 1:  ENABLED/DISABLED
Enable or disable the playback of the music contents of BGM 1 input (Back ground music).
•
BGM music 2:  ENABLED/DISABLED
Enable or disable the playback of the music contents of BGM 2 input (Back ground music).
To change the parameter, simply press OK to access the configuration screen, select the desired setting
using the UP and DOWN arrows. To confirm the configuration, press OK, to cancel the changes, press
BACK.
The CONF MASTER EQUALIZER sub-menu allows you to view and configure the equalization parameters
of the system's audio output.
It is possible to configure the treble, mid and bass, the configurable values are expressed in decibels
referred to 0dB.
To configure an equalization value, just press OK to access the Master equalizer set configuration screen,
with the RIGHT and LEFT arrows you can select the band to be modified, with the UP and DOWN arrows
you can select the desired value. To confirm the configuration, press OK, to cancel the changes, press
BACK.
The configured values are applied in real time during parameter modification.
The DELETE SYSTEM LOGS sub-menu allows you to delete all Logs system events; to complete the
operation, simply press OK; to cancel press
BACK
.
NOTE:
The deletion of all Logs will empty the list of recorded events and will write a Log deletion event.