PROEL AE604, Руководство по эксплуатации и установке, Страница: 24 / 48

24
USRMAN_AE604EN_REV002
Capsule:
OPEN  Microphone capsule or wiring interrupted
SHORT  Microphone capsule or wiring in short - circuit
OK  Microphone capsule and wiring intact
The Ethernet Fire Mic list menù allows you to view and manage the status of remote microphone stations
connected to the system via the Ethernet network. The installed microphone stations are presented in
the form of a list and it is possible to scroll them using the UP and DOWN arrows, pressing OK to access
the detail page.
The summary status is associated with each microphone station:
DISABLED  Disabled (Disablement)
FAULT  Faulty
OK  Properly functioning
The Ethernet Fire Mic detail menù allows you to view the status of the remote microphone station
connected to the system via the Ethernet network.
The operating status is detailed:
Fire mic status:
NOT IN USE     No microphone workstation installed
DISABLED  Disabled (Disablement)
FAULT  Faulty
OK  Properly functioning
Fault:
COMMUNICATION LOSS  Communication error with the system
GENERAL FAULT

Microphone workstation faulty
CAPSULE OPEN  Microphone capsule or wiring interrupted
CAPSULE SHORT  Microphone capsule or wiring in short - circuit
NONE  No fault detected
Net name:  Network name of microphone workstation
Ip:  IP network address
From one of the detail screens, press OK to access the POP-UP in which it is possible to insert or remove
the "disablement" condition.
From the POP-UP, with the section in “disablement” it is possible to replace the local microphone
without the system reporting the fault. It is also possible, from the "disablement" condition, to remove a
remote microphone station without the system reporting the fault.
NOTE: When the "Fire microphone" section is in "disablement" all the functions related to the
emergency microphone stations are deactivated. Any "FAULTS" errors are also removed.