4096-535
PRODELIN CORPORATION
3.8M C-BAND Rx/Tx ANTENNA SYSTEM
13
3.3
REFLECTOR SUPPORT ASSEMBLY
STEP 1:
WARNING! The reflector support frame includes a precision alignment feature. Do not drop or
drag the frame during the installation process. Do not attempt to adjust the round tube spacers
in the frame assembly, as these are factory pre-set. If these spacers are loose or damaged, or
there is any obvious damage to the frame, then you must obtain replacement parts for a
successful installation.
A) Before beginning antenna assembly.
Install 12 threaded inserts (items 1-6)
thru the face of each reflector quadrant.
Note that there are 6 different insert
lengths, 2 of each. Each insert must be
in the correct position in each quadrant
for correct assembly. The top of each
insert is stamped with a insert number
( 1 thru 6). The numbers shown in the
illustration correspond with the stamped
numbers on the inserts.
B) Secure inserts with 7/8” hardware
( items 19, 20, 21 ). Snug but do not
tighten.
Q 1
Q 4
Q 2
Q 3
5
6
3
3
5
6
1
1
4
2
4
2
[ 21 ]
Threaded Insert
[ 20 ]
[ 19 ]
Quadrant Face