4096-535
PRODELIN CORPORATION
3.8M C-BAND Rx/Tx ANTENNA SYSTEM
14
STEP 2:
STEP 3:
Locate the crossarms ( item 12 ) and
remove the 1/2” hardware &
anti-crushtubes.
1/2
Hardware
Crushtube
1/2 Bolt
Crossarm
A) Lay the support frame (item 13) on
a safe flat surface, being careful not
to damage the tube spacers.
B) Insert the anti-crushtubes into the 4
holes on the back of the frame as
shown.
C) Place each crossarm over the anti-
crushtubes and secure with the 1/2”
hardware removed in step 2. Make
sure label A of the support frame is
located with label A on the crossarm.
Repeat procedure with labels B,
C and D -
See Detail A
. Tighten
securely.
Note: Hardware should be
inserted from crossarm side.
Anti-
Crushtubes
(both sides)
Support Frame
Crossarms
Labels
Crossarm
Support Frame
Detail A
