ProCurve 800, Руководство по настройке

Страница: 153 / 406

3-25
Initial Setup of the ProCurve NAC 800
System Settings
2. Chose your region from the Region drop-down menu.
While not mandatory, this setting narrows the selection for the next
setting: your time zone.
3. Select the correct time zone from the
Time zone
drop-down menu.
Time zones are listed by relation to Greenwich Mean Time (GMT)—for
example, GMT –6:00—as well as by name and by select cities in that time
zone. (If your city is not listed, you can either rely entirely on the GMT
offset or look for a city that you know is in your time zone.)
It is important to select the correct time zone so that the NAC 800
appropriately adjusts the time that it receives from the NTP server.
4. Choose how the NAC 800 MS receives its clock (automatically or
manually):
• Automatically receive NTP updates from
Specify the NTP servers in the field on the right. You can identify a
server by FQDN or IP address.
You can specify multiple servers; separate the IP addresses or FQDNs
with commas (no space). Visit
http://support.ntp.org/bin/view/
Servers/NTPPoolServers
for a list of public NTP servers.
• Manually set date and time
i. The current time and date are displayed on the right. Click edit .
Figure 3-13. Home > System Configuration > Management Server > Date And Time
ii. Set the date in the Date drop-down menus—select the day from
the left, the month from the center, and the year from the right
drop-down menus.
iii. Set the time in the Time fields—enter the hour and minutes in the
12-hour clock and choose AM or PM from the drop-down menu.
iv. Click the ok button.