ProCurve 800, Руководство по настройке, Страница: 137 / 406

3-9
Initial Setup of the ProCurve NAC 800
System Settings
9. Create an account that grants access to the MS’s Web browser interface:
This account has the Administrator role and full rights to all management
and configuration tasks available in the Web browser interface. (See
“Configure User Roles” on page 3-47 to learn more about roles.)
a. Enter a string in the
User name
field.
The username can include alphabetic characters but not numbers. It
can also include the “at” character (@).
b. Enter a string in the Password field.
The password must include a mix of letters and numbers and be at
least 8 characters long. It can also include special characters and
spaces.
c. Enter the same password in the
Re-enter password
field.
10. Click the finish button.
You have completed the initial setup of the MS system settings, and the Home
window is displayed. If you want to change the settings at a later point, see
“Edit System Settings on an MS or a CS” on page 3-16.
If your NAC 800 is a CS—typical for a device that acts as a RADIUS server
only—the system setup is complete. Otherwise, you must add ESs, as
described in the section below.
Initial Configuration of ES Settings
When you add an ES, the MS contacts it and configures its initial system
settings. You can then control the ES through the MS Web browser interface,
configuring most of the capabilities described in this management and config-
uration guide.
Before you can add an ES, you must access it directly and configure its IP
address and default router, as described in “Access the Web Browser Inter-
face” on page 2-37 in Chapter 2: “Management Options for the ProCurve
NAC 800.” You must also create an enforcement cluster, as described in the
section below.
Create an Enforcement Cluster. To create an enforcement cluster, follow
these steps:
1. Select Home > System configuration > Enforcement clusters &
servers .