» INSTALLATION INSTRUCTIONS
/ OCTO / OCTO + / HEXA
28
proswell.fr
65
Study the illustration above. Mount the brackets (identi-
cal to the connecting brackets) as shown using screws
(bag M).
Next, fasten the latches into position (use the items
from bag N) to ensure effective locking.
>>
ASSEMBLING AND INSTALLING THE STAINLESS STEEL LADDER
Assemble the various parts of the ladder referring to the
installation instructions provided.
When mounting the hand rails, do not forget the two
rubber seals that will be used to hold the decorative
escutcheon plates in position.
Position the ladder in the pool on the coping module
of your choice (except the wall holding the skimmer
and counter swim module), remember that it should be
opposite the wooden ladder.
Adjust the position of the ladder paying particular
attention to ensure that it is vertical and that the bumpers
are pressed firmly against the inside wall.
Mark the positions for drilling. Remove the ladder and
drill.
Fix the ladder in place according to the instructions
provided using SS screws from bag B.
Slide the 2 rubber seals along the tubes so that they hold
the escutcheon plates in position.
>>
ASSEMBLING AND POSITIONING THE WOODEN LADDER
66
67
68
The stringers and the treads for the wooden steps are in
the Wood kit. Assemble the wooden steps using the SS
screws (bag K). For cleaner, more efficient assembly, we
recommend that you pre-drill the various elements (4 mm
drill bit) and mill the holes to avoid splitting the wood and
raising splinters.
Make sure that all elements are oriented correctly.
L 30 mm
O-ring
Escutcheon
plate
Mounting
plate
