Procomp BIW2A, Руководство пользователя

Страница: 40 / 68

3
BIW2A User’ s Manual
36
The Reset Switch
A reset switch is standard to almost all PCs.
Pushing the switch will cause the computer to do
a “hard” restart. If the computer hangs during
operation and becomes unresponsive to other con-
trols, you can restart the computer using this
switch. Don’ t use it if the computer is operating
normally. You should always shut down from
within the Operating System. Only use reset as a
last resort and instead of turning the computer off
and then back on.
The Suspend Button
An external Suspend button appears on some
cases. Pushing the button will cause the system to
enter whatever power-saving suspend or “Sleep”
mode it is configured to enter. In suspend mode
the computer may appear to be turned off, but is
in fact just in a low power mode. Don’ t turn the
computer off when it is suspended. Pushing the
button while the system is suspended will resume
or “Wake Up” the system and cause it to return to
its previous state.
Indicator Lights
The motherboard supports several indicator lights
that may be present on the front panel of the sys-
tem housing. These include a Power LED, a Hard
Disk Drive LED and a Suspend LED.
•
Power LED: Lights when the system is on
•
Hard Disk Drive LED: Flashes when the hard
disk drive is being accessed
•
Suspend LED: Lights when the system is in
power saving Suspend or “ACPI” mode