Procomp BIW2A, Руководство пользователя

Страница: 17 / 68

Configuration & Installation
2
13
Jumper Functions
This is sections explains the functions performed
by the jumper switches.
JP2: Power On Feature
This jumper sets support for the Power On feature
under the ACPI power saving specification. When
this feature is enabled, a PC98-compliant key-
board or a pointing device can turn on the system
in a number of ways. You can configure how the
feature operates in the Integrated Peripherals sec-
tion of the CMOS Setup Utility. See Chapter 3 for
more information on this. The default setting is
Enabled.
JP3: Clear CMOS
This jumper is a trouble shooting jumper that al-
lows you to clear the system configuration record
that is created by the Award BIOS CMOS Setup
Utility and stored in CMOS memory. You only do
this if the system has become unbootable due to
incorrect settings or a corrupted configuration re-
cord and you can’ t access the CMOS Setup Utility.
Please refer to the section on Troubleshooting in
Chapter 5 for information on how to do this. The
default setting of this jumper is Normal.
JP4: Onboard Audio
This jumper enables or disables the onboard audio.
If you will use either the standard or enhanced
onboard audio, this must be set to Enabled. If you
do not want to use the onboard audio, set this
jumper to the Disabled setting. The default setting
is Enabled.
Note: If you will not use the onboard audio, don’ t
install an audio driver from the Support Disk.
2
4
JP2
2
4
JP3
4
2
JP4