Procomp BIW2A, Руководство пользователя

Страница: 26 / 68

BIW2A User’ s Manual
22
2. Attach whatever mounting hardware is needed
to the case. Some cases support more than one
motherboard form factor, for example Baby
AT, Micro ATX and ATX. Identify the
mounting points that match as many of the
mounting holes on the motherboard as possi-
ble and install hardware at those points. Some
cases use both metal nut-headed screws and
plastic spacers with a pointed end that inserts
in a mounting hole on the motherboard. The
spacers fit into slots in the motherboard
mounting plate.
3. Install an ATX port cover panel if necessary.
Follow the instructions that came with the ca-
se and make sure you use a cover panel that
matches the port configuration on the mother-
board if more than one panel came with the
case.
4. Line the motherboard mounting holes up with
the appropriate attachment points on the
motherboard mounting plate. If you had to in-
stall plastic spacers in some holes, make sure
they fit into their slots as you align the board.
5. Use the mounting screws and washers that
came with the system case to attach the moth-
erboard to the mounting plate. Seat the screws
firmly but not to tightly.
With the motherboard installed, you can now at-
tach internal system components including wire
leads from the system case, any disk drive or other
cables and any port brackets.