Procomp BIW2A, Руководство пользователя

Страница: 23 / 68

Configuration & Installation
2
19
4. Press the DIMM fully into the socket. The
retaining latches will rotate upwards and
should fit into the corresponding notches on
the DIMM. Press the latches into place if nec-
essary. If the latches won’ t insert properly into
the module notches push them back and try
inserting the DIMM again. When the latches
are fully in place the DIMM is properly in-
stalled.
Depending on the module size and the total ca-
pacity you want to install, you may install memo-
ry in only one or both sockets. For example, to
install 128MB of system memory you can install
either one 128MB DIMM in one socket or two
64MB modules using both sockets. We recom-
mend that you use the largest module that fits
your installation plans so that you can leave the
second socket open for later upgrades.
If you want to upgrade system memory after the
motherboard is installed you can install additional
memory in the empty socket. If there is no empty
socket, you will need to remove at least one mod-
ule and replace it with the upgrade module. In
some cases, you may need to remove both mod-
ules to allow installing your intended configura-
tion. To remove a DIMM do as follows.