Proceq ZRP 6030+, Инструкция по эксплуатации

Страница: 30 / 52

Page 30
11.4 Input of additional information
Below the measurement data, additional
information such as location, street etc. can
be added or changed.
To edit a value, tap the entry and press
“Edit”, then enter the new value and confirm.
11.5 Printing of a measuring report
Select a printer by pressing the symbol .
The optional internal thermal printer or an
external printer connected to the USB-
interface can be used. The measuring report
can be printed out by selecting the desired
printer. To choose the information to be
printed on the measuring report, please refer
to chapter 13.6.7
“Printer” on page 40.
11.6 Storing the archive data on a USB flash drive
Connect a USB-stick on the USB-interface
(host). By pressing the button , all
measuring entries will be stored on the USB-
stick. The exported measurements can be
opened on a computer using the software
“MappingTools“. For further information, refer
to the separate “MappingTools” instruction
manual.