Proceq ZRP 6030+, Инструкция по эксплуатации

Страница: 7 / 52

Page 7
2 Safety information
2.1 Symbols used
This note comprises instructions needed to follow directions, specifications,
proper working procedure and to avoid data loss, damage or destruction of
the instrument.
This note signifies a warning about dangers to life and limb if the apparatus
is handled improperly. Observe these notes and be particularly careful in
these cases. Also inform other users on all safety notes. Besides the notes
in this instruction manual the generally applicable safety instructions and
regulations for prevention of accidents must be observed.
2.2 Safety notes and hints
It is strictly forbidden to open the housing of the ZRP 6030+. If not observed,
all the guarantee and liability claims to Proceq SA will be void.
The ZRP 6030+ is a high quality, state of the art instrument and is safe to
operate. Nevertheless there is always risk when the instrument is handled
inappropriately.
Every person working with the ZRP 6030+ or maintaining the equipment
must read and understand the manual completely. In particular the safety
precautions and warnings.
The ZRP 6030+ is exclusively intended for the determination of night
visibility (coefficient of luminous intensity R and RI) of road studs, ambient
temperature (°C/°F) as well as relative humidity (rH %). Any other use is
considered as not being in accordance with the intentions of the
manufacturer. The manufacturer is not liable for damage resulting from
inappropriate application. The user bears the full responsibility.
Avoid any mode of operation that could affect the safe working with the ZRP
6030+. Especially the determination of the visibility of raised pavement
markings must take place as described in this instruction manual.
Proceq SA refuses all warranty and liability claims for damages caused by
usage of the ZRP 6030+ in combination with non-original accessories , or
accessories from 3
rd
party suppliers.
Unauthorized modifications and changes of the ZRP 6030+ are not allowed.
Reproduction without permission is not allowed.
All maintenance and repair work which is not explicitly allowed and
described in this manual (see chapter 15.1
“Maintenance to be carried out
by the user
” on page 44 shall only be carried out by
Proceq SA or your
authorized Proceq agent, failure to comply voids warranty.
Keep the device dry. Danger of short circuit.