18
Part No. 1123839
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS
SECTION 3—SAFETY/HANDLING OF
WHEELCHAIRS
“Safety and Handling” of the wheelchair requires the close attention of the wheelchair
user as well as the assistant. This manual points out the most common procedures and
techniques involved in the safe operation and maintenance of the wheelchair. It is
important to practice and master these safe techniques until you are comfortable in
maneuvering around the frequently encountered architectural barriers.
Use this information only as a “basic” guide. The techniques that are discussed on the
following pages have been used successfully by many.
Individual wheelchair users often develop skills to deal with daily living activities that
may differ from those described in this manual. ProBasics recognizes and encourages
each individual to try what works best for him/her in overcoming architectural obstacles
that they may encounter. However, all warnings and cautions given in this manual MUST
be followed. Techniques in this manual are a starting point for the new wheelchair user
and assistant with “safety” as the most important consideration for all.
Stability and Balance
WARNING
ALWAYS wear your seat positioning strap.The seat positioning strap is a
positioning belt only. It is not designed for use as a safety device withstanding high
stress loads such as auto or aircraft safety belts. If signs of wear appear, belt MUST
be replaced immediately.
To assure stability and proper operation of your wheelchair, you must at all times
maintain proper balance. Your wheelchair has been designed to remain upright and
stable during normal daily activities as long as you do not move beyond the center of
gravity. DO NOT lean forward out of the wheelchair any further than the length of the
armrests.
Coping With Everyday Obstacles
Coping with the irritation of everyday obstacles can be alleviated somewhat by learning
how to manage your wheelchair. Keep in mind your center of gravity to maintain stability
and balance.
While the walking beam allows you to traverse up to a 2-inch bump or threshold,
stopping after the wheels cross the bump poses a problem. The chair cannot reverse over
the bump at this point. Continue forward and then turn around.
While the wheelchair is designed for use primarily in and around the home, the provider
should determine whether this chair is suitable for the actual environment the chair will
be used in.
