PROAIM Kite-33 Starter, Руководство по установке и эксплуатации

Страница: 13 / 14

PROAIM KITE-33 STARTER PACKAGE 13
Example:
Move the pan & tilt head all the way to the left, zoom out w/ subject framed in foreground
Now move your hands to the right (camera swings to the left) while panning the camera right, keeping
your subject framed.
You can also try this with up and down shots or diagonal shots. Just remember to move your hands the
same direction as you pan/tilt the camera.
WARRANTY
We offer a one year warranty for our products from the date of purchase. We will repair or re-
place your product, free of charge, in the event of a defect in materials or craftsmanship obtained
during normal use or handling based on the user manual. Please note that we will not cover any
shipping costs for returning the product to us. If any VAT or import duties are applied to the re-
turn, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do-
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company. We are not liable for incidental or consequential
damages resulting from the use of the unit or occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers after the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. After that, Nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without first getting a response and getting the approval to send back
the item. In case of any kind of dissatisfaction, we urge you to
Contact us immediately and we
shall do our best to help you out. For any other assistance you can reach us via email.
Safety & Maintainence :
1. Always remember to remove the counter weight first when taking down the Jib because if the
camera is removed first you will have created a catapult, which if released, will topple the Jib over
and ruin your day.
2. Make certain that you align the Jib arm with a Tripod Leg before removing the counter weight.
Failure to do this may cause the Jib to tip over.
3.
Double-check all nuts to make sure they are snug, as they may loosen in transit.
4. Lubricate the nylon sheet inside hub assembly after sometime for smooth panning.
5. Apply Rust Prevention oil to all the fasteners and stress cable after sometime to avoid getting rust on
these parts for long lasting durability of these parts.
6. Inspect the stress cable, upon each set up, for any damage or wear and replace if necessary.
7. Before installing the camera, balance the jib only with counterweight and leveling.
8. Don’t leave the setup with camera alone (incase of wind) as it may topple and cause harm.