PROAIM Kite-33 Starter, Руководство по установке и эксплуатации

Страница: 12 / 14

PROAIM KITE-33 STARTER PACKAGE 12
4. 16’ Jib
Weights required for balancing only Jib (without camera & Pan Tilt) is: 22,225 Kg (49 lbs)
For balancing 7 Kg (15.4 lbs), we further need another 24.5 Kg (54 lbs), the formula is :
(Weight of Pan Tilt) x 3.5 = Additional counter weight required to balance
the equipment on the Jib
(e.g. 7Kg x 3.5 = 24.5 Kg)
Total recommended weight: 46,250 Kg (102 lbs)
5.
13’ Jib
Weights required for balancing only Jib (without camera & Pan Tilt) is: 12,375 Kg (27 lbs)
For balancing 7 Kg (15.4 lbs), we further need another 14 Kg (31 lbs), the formula is :
(Weight of Pan Tilt) x 2 = Additional counter weight required to balance
. the equipment on the Jib
(e.g. 7Kg x 2 = 14 Kg)
Total recommended weight: 27,875 Kg (61 lbs)
6.
10’ Jib
Weights required for balancing only Jib (without camera & Pan Tilt) is: 3,375 Kg (7.4 lbs)
For balancing 7 Kg (15.4 lbs), we further need another 12,375 Kg (27 lbs), the formula is :
(Weight of Pan Tilt) x 1.8 = Additional counter weight required to balance
. the equipment on the Jib
(e.g. 7Kg x 1.8 = 12,375 Kg)
Total recommended weight: 15,750 Kg (35 lbs)
Testing Equipment
1.
Make sure you are on a level surface and have adequate room.
2.
Fly the jib around some before you mount any equipment on it. This will allow you to test the in-
stallation, determine if you are on level ground and you are in proper adjustment.
3.
After testing a movement, let go of the arm. It should slow down and stop without moving up,
down, left or right after it stops, If not, it is not balanced properly. Use the lighter counterweights, if
needed, or readjust your leveling as required.
4.
Now you may install your equipment on the arm.
5.
Balance with the appropriate counter weight as required.
For some interesting compound shots try:
Moving the pan & tilt control the same direction as you move the rear of the jib. This
keeps your subject framed but changes the perspective of the camera.