PROAIM Kite-33 Starter, Руководство по установке и эксплуатации

Страница: 7 / 14

PROAIM KITE-33 STARTER PACKAGE 7
INSTALLING THE TAIL EXTENSION

Insert the coupler to the end section that is attached with the stand’s central fork.

Insert the front weight shank by leaving the one black tube at one end, slide it through to the other
end, attach the other black tube with the shank rod and tighten the nut.

Attach the end section at the end of the coupler and then Install the bolt, washers and nut from side
at the first hole of the end section.
First hole of the End
Section
ASSEMBLING THE REAR FRAME

Take the two 16mm thick rods and two 25mm thick rods. Attach
these rods altogether so that it makes a rectangle and for this
insert the 16mm rods into slots of 25mm rods.