background image

 

 

Operating instructions LITTY 4you 

 

27

 

33  Appendix: Hand-over certificate 

33.1  Required compliance criteria to authorise use 

Topics

 

completed / 
fulfilled 

Remarks 

The product is suitable for the customer based on 
their own judgement and the customer informa-
tion received regarding the disability-related re-
strictions. 

 

 

The use intended by the customer is fully consis-
tent with the intended use as described in the 
operating instructions (see the Product descrip-
tion / intended use chapter). 

 

 

The product's equipment is suitable to allow the 
customer safe use with maximum reduction of 
risks (see check list on the following page). 

 

 

The customer's driving ability was checked during 
a test drive in difficult driving situations and found 
to be appropriate (see the check list on the fol-
lowing page).

 

 

 

The operating instructions, and explicitly all of the 
warning and safety instructions contained therein, 
were discussed during the training in detail and 
understood by the user. The user was then 
handed these operating instructions. 

 

 

 

 

 

Содержание LITTY 4you









































Отзывы: