background image

Operating instructions LITTY 4you 

 

28

 

33.2  Check list for training the user  

Topics 

com-
pleted / 
fulfilled 

All mechanical function controls were explained and their function demonstrated. 

 

How the brakes work was demonstrated and then performed by the user themselves and 
/ or their assistant.  

 

Attention was drawn to the fact that it is a parking brake and not a service brake. 

 

How the push handles work was demonstrated and then tested by the user themselves 
and / or their assistant. 

 

How the anti-tippers work was demonstrated and then tested by the user themselves 
and / or their assistant. 

 

Use of the service brakes was demonstrated and then tested by the user themselves 
and / or their assistant.  

 

Advice on the drive wheels regarding tyre pressure and tread depth has been given and 
understood by the customer.  

 

Test drive: Overcoming obstacles with the wheelchair, e.g. the kerb 

 

Test drive: Driving on the level forwards and backwards and also uphill and downhill in 
the direction of travel 

 

Test: Operating the anti-tippers in front of an obstacle 

 

Instructions about care, cleaning and maintenance of the product were given. 

 

The contents of the operating instructions have been worked through completely on the 
basis of the product training and have been completely understood by the customer. 
Particular emphasis was placed on the safety advice. 

 

 

The use of the product is only permitted when all topics listed in "Required compliance criteria for 
those permitted to use" have been met by the user and all the points have been ticked off in the 
"Check list for training the user". 

 

 

Содержание LITTY 4you









































Отзывы: