Usage instructions BUDDY 4all & classic
30
To check or correct the tyre pressure
, pro-
ceed as follows:
1. Secure the product to prevent it rolling
away.
2. The drive wheel is normally fitted with a car
tyre valve. Unscrew the valve cap.
Figure 63: Valve with cap
3. Place the valve attachment of the com-
pressed air device or the compressor onto
the valve (if necessary, an adapter must be
placed on the valve attachment) and, if a
clamp lever is fitted, secure the connection
by applying the lever.
4. Now check the tyre pressure. If the tyre
pressure does not match the specifica-
tions, correct it.
5. Finally release the clamp lever (if present),
pull the valve attachment off the valve and
replace the valve cap.
Figure 64: Compressor
Figure 65: Valve adapter and clamp lever of the
compressor
21.5 Wheelbase extension
The wheelbase is extended via a
permanently
mounted extended bike plate
. The wheels
can be inserted into the axle of the extended
wheel plate at any time.
Figure 66: Extended bike plate
For
changing the drive wheels
between the
wheelchair axle and the axle of the wheelbase
extension, proceed as described Chapter 21.1.
Figure 67: Wheelbase extension via extended wheel
plate
Axle of the wheelbase extension
Valve adapter
Clamp lever
Valve with cap
Wheelchair axle
