Usage instructions BUDDY 4all & classic
50
To
attach
them, the push handles are inserted
and held at the correct height, and the quick
release levers are closed. Finally, the M4 end
stop screws (AF 3 mm) are screwed in again.
If necessary the tension can be adjusted
by turning the quick release lever clockwise
until it reaches the end stop.
Each time prior to use, the M4 end stop
screws (AF 3 mm) must have been mounted
again.
Equipment option:
The push handles are also optionally available
with lateral handle offset.
Figure 130: Push handles, offset to the back, with
lateral handle offset
26.2 Central push handle with folding
gripping area and folding push
handle bar
Figure 131: Central push handle with folding grip-
ping area
Figure 132: Foldable push handle bar
Adjusting the height
of the central push han-
dle and the push handle bar is possible without
tools using quick release levers. To adjust, the
quick release lever(s) is (are) opened and
closed again after adjusting. The height can be
infinitely adjusted.
Figure 133: Closed quick release lever
Figure 134: Quick release lever open
Quick release
lever
Quick release
lever open
