Pro 8318 WB, Руководство пользователя

Страница: 7 / 17

Computer window and function
Operation instruction of computer
1.Sit on the exercise bike, then begin to pedal, the equipment begin self-genetating power for computer
display.
2.Press “Quick Start” key to enter into manual mode, press
“
+
”
or
“
–
”
to select program mode.
3.Press “Enter“ key, with
“
+
”
or
“
–
”
to select the desired workout. Press “Reset” key to reset system.
Computer Instruction:
1
、
Summarize
：
The computer is applied to veritical exercise bike, recumbent bike and elliptical bike.
2
、
Display type and mode:
（
16
）
-14.2mm
，
digital of 13 section number, dot-matrix-16H*24W 3mm (13)
Function displayer (singular) LED.
3
、
Power supply: Provide power supply to self-generated motor.
4
、
Resistance system: Self-generated resistance system
5
、
General specifiction: about 9
″
H
×
13
″
W
6
、
Assemble
：
on the computer pole, the bolt put through the computer pole not the computer itself.
7
、
Connecting deiver: the product with 3 connecting device.: connect computer and the lower controlling
part, connect handhold heart rate , connect the lower controlling part/power supply
8
、
Key: with 7membrane key: “ + ” , “ - ” , Enter, Quick Start, Reset, Scan 1, Scan 2.
9
、
Audible dispaly
：
the equipment which can beep will be placed on PCB, Each time when user press the
key and one set of program was finished exercise, it will beep. When the exercise time reach 00.00,
it beeps for 4 seconds and “Finish“ will be displayed, then the program end.
9
、
Panel: High quality polyester without veins cover the surface of computer, window color be red around
the LED.
6. Computer handling
Scan 2
Scan 1
+
-
Reset
Enter
Quick
Start