B E L 2 5 2 F u l l y A u t o m a t i c U n i f o r m C a s e T a p e S e a l e r
6
65-06-11 5/18/2007
Machine Adjustments
Safety: Disconnect machine electrics and compressed air before making any machine
adjustments.
There are three main adjustments required in setting up the BEL 252 to run a particular case size:
1.
Case height ‘E’
- made with top hand wheel to move the machine head assembly up and down to the
height of the box.
2.
Snap Folder
case width adjustment
‘D’
- made by loosening the locking handles above each folder
unit and pulling or pushing a folder from the side of the machine. A self-centering mechanism moves
both folders together.
3.
Conveyor case width adjustment
‘D’
- made with side hand crank to move side belt conveyors in
and out to fit the width of the box.
D
120-093
D
E
Snap Folder
s
[TOP FLAP
FOLDERS]
Bottom Tape Head
Top Tape Head
UNI-Drive
side belt
Conveyor
CONVEYOR CASE
WIDTH ADJUSTMENT
DIMENSION ‘D’
CASE HEIGHT ADJUSTMENT
DIMENSION ‘E’
On/Off Switch
Snap Folder
WIDTH
ADJUSTMENT
DIMENSION ‘D’
Compressed air supply [LH rear
corner]
