Pro-Line Boats PRO 86 MIX EURO, Руководство пользователя

Страница: 7 / 32

6 Preparation
Connect the power cord to the device and connect to a 220V/50Hz power supply. The user
shall use electric power cord with a ground contact.
- Turn the power switch ON;
- The counter runs a diagnostic and is then ready for operation.
7 Selection of counting modes
«COUNT» MODE
« COUNT » mode – banknotes’ normal counting mode. Is used for counting various
currencies. Is recommended for medium and large counting volumes. The recommended
maximum load of banknotes on the hopper is 400 banknotes.
The counting speed in this mode is 900/1200/1500 banknotes per minute. In this mode you
can quickly count banknotes with UV detection.
When counting in this mode, the device is not sensitive to the placement of the banknotes,
irrelevant marks, dirt, a banknote’s loss of color, crumpled banknotes, banknotes with curved
edges or corners, and taped or glued banknotes.
«SORT» MODE
‹‹ SORT » mode – A mode for banknotes counting and summation by one denomination
(automatically determined by the first banknote’s denomination). Uses MT, MG, UV, DEN
detection, and rejects banknotes with other denominations. This mode is designed only to
count EURO banknotes from the 2002 series. The counting speed in this mode is 1200
banknotes per minute. We recommend using this mode to count and verify banknotes of one
denomination by MT Detection for small and medium volumes. The recommended maximum
load of banknotes on the hopper is 200 banknotes. In this mode, the counter is sensitive to
the placement of the banknotes, irrelevant marks, dirt, a banknote’s loss of color, crumpled
banknotes, banknotes with curved edges or corners, and taped or glued banknotes. When
there is a suspicious banknote or a banknote of another denomination, the counter will give
an error.
Fig.4
Fig.5
7
English