Pro-Line Boats PRO 86 MIX EURO, Руководство пользователя, Страница: 15 / 32

Code Message Reason
EH
1 A half banknote has been
detected
2 A banknote passes through
incorrectly
1. Remove the banknote (lying on the top). Press
the «START» button and repeat the counting
procedure.
2. Count banknotes once again. Banknotes shall be
placed in a neat stack on the hopper. You must
align banknotes in a neat stack without distortion
(Figure 1, position 4)
CF-2
1. The currency being counted is
other than EURO
2. . Error of magnetic thread
detection MT, MG 1. «VALUE» and «SORT» modes are only for
EURO banknotes counting
2. Remove the banknote (lying on the top) and
verify it with IR detector
CF-3
3. Counted banknotes of mixed
denominations in «SORT» mode
4. The magnetic thread detection
level does not correspond to the
banknote
3. «SORT» mode is used only for counting
banknotes of the same denomination
4. Remove the banknote (lying on the top) and
verify it with IR detector
5. Incorrect placement banknotes in
the counter
5. Put banknotes into the hopper. Banknotes shall
be placed in a neat stack on the hopper. You must
align banknotes in a neat stack without distortion
(see cl. 9.1)
6. Improperly adjusted slot.
7. Two EURO banknotes stuck
together
6. Adjust the slot under cl. 12
7. Decrease the slot under cl. 12
15
English