manualshive.com logo in svg

Pro-Line Boats 28 Express 2006, Руководство пользователя

Поделиться
Скачать
Pro-Line Boats 28 Express 2006 Скачать руководство пользователя страница 36

 

30

 

 
The fresh water tank can be 
accessed via the hatch 
located under the mattress in 
the mid-berth.  The fresh 
water pump (not shown in 
this photo) is located on the 
port side of the fresh water 
tank.

 

 

Important:  Fill the tank with potable water only.  Refilling the tank often will help to keep it 
a source of clean fresh drinking water.  Never fill the fresh water tank with anything other 
than fresh water. 

 

Fresh Water Tank Fill 

This is a stainless steel fitting located amidships on the port gunwale.  Twist the cap to open the fitting.  
The cap is connected to the fitting by a chain or cable so that it will not fall into the water and/or get lost.  
Use a garden hose to fill the fresh water tank through this fitting.  Fill the tank with potable water only. 
 

City Water Hook-Up/Inlet 

This fitting is located on the outside of the transom on the port side.  Twist the cap to open the fitting and 
then connect to your marina’s water supply outlet.  Fill the fresh water system with potable water only. 
 

Fresh Water Pump 

The 5.0 fresh water pump is accessible via the hatch under the 
mattress in the mid berth.  Locate the fresh water pump switch 
(labeled fresh water) and the DC main switch on the AC/DC 
panel and move both switches to the on position.  Next go into 
the head area and turn on the sink faucet/nozzle to verify that 
water is coming out of the faucet/nozzle.  Then, turn off the 
head sink faucet/nozzle and repeat the same process for the 
faucet/nozzle at the cabin sink in the galley. 
 
 

 

If the fresh water system is not in going to be in use, return to the AC/DC panel in the cabin and turn the 
cabin water system switch to the off position. 
 

Note:  If you should hear a sucking sound, you may have a leak on the inlet side of the 
fresh water tank.  The tank can be accessed via the panel located under the mattress in 
the mid berth.  There are 2 hoses connected to the front of the tank.  The larger diameter 
hose is the water fill hose and the smaller diameter hose is the water vent hose.  Inspect 
the hoses for leaks and make certain that the hose connections are secure. 
 

When you close all of the faucets, the pump will run briefly.  If the pump continues to run with all faucets 
closed, check the system for leaks or have the pump tested. 
 

Fresh Water Stations 

The boat is equipped with 3 fresh water stations: 
 
 

39-Gallon Fresh 

Water Tank 

Forward Bilge 

Pump & 

Automatic Float 

Switch 

Air Conditioner 

Seacock 

Fresh Water 

Pump & Filter

Содержание 28 Express 2006

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды