23
is not charged and flooding occurs, the boat could swamp causing damage and possible loss of
life or property.
Depressing the applicable bilge pump switch (Bilge 1, Bilge 2 or Fwd) to the up or forward position
activates the corresponding bilge pump. If for some reason the indicator light on your bilge pump
switch comes on, check your bilge for water. It is not uncommon for rain water or water from
washing your boat to accumulate in the bilge. Standing water will activate the automatic float that
is connected to the bilge pump. If you notice your pump running frequently during your day on the
water, you should check the thru hull fittings, hose connections, etc. for any possible leaks.
Lighting Systems
Baitwell Light
The baitwell light switch is located on the switch panel and is labeled baitwell with a light symbol below.
To turn on the baitwell light, press the switch forward and open the baitwell lid to see if the baitwell light is
on. Press the baitwell light switch to the down or aft position to turn off the baitwell light.
Bilge Lights
The bilge light switch is located on the switch panel and is labeled bilge with a light symbol on the switch.
The 2 bilge lights are installed on the port and starboard stringers. Press the switch forward to turn on the
bilge lights. Press the bilge light switch to the down or aft position to turn off the bilge lights.
Cabin Lights
Cabin lights are installed in the main cabin, the mid berth and the head area. The cabin light switch is
located on the AC/DC panel inside the cabin, on the port wall of the main salon. See the section under
“Electrical System” earlier in this chapter for more information on the AC/DC panel.
Switch the DC main and the cabin light switches to the on position to turn on the cabin lights. Each of
these lights can then be turned on or off individually. When you are finished using the lights, press the
cabin light and DC main switches to the off position.
•
Bullet lights (3) are located in the main cabin. Each light can be turned on individually by
turning the small switch located on the base of the light.
•
A florescent light is located in the head area and can be turned on by pressing the small
switch located at the end of the light assembly.
•
A dome light is located in the mid berth and can be turned on by flipping the small toggle
switch on the base of the light assembly.
Courtesy Light
A small courtesy light is installed at the top of the cabin steps. This light
can be turned on at the console by pressing the courtesy light switch in the
forward position. The switches on the AC/DC panel do not control this light.
Cockpit Lights
The cockpit lights are small circular lights located around the forward and
aft cockpit area. Locate the 2-way cockpit light switch on the switch panel
and press the switch in the forward position to turn on the cockpit lights.
Press the cockpit light switch in the aft position to turn the lights off.
