28
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, first
unplug the power adapter.
Next, remove the
four indicated
M4 x 16mm
Flat Head
Screws (101)
and the Lower
Rear Shield
Cover (68).
Next, turn the Large Pulley (21) until a Pulley Magnet
(104) is aligned with the Reed Switch (116). Then,
slightly loosen the M4 x 19mm Screw (113), slide the
Reed Switch slightly closer to or away from the Pulley
Magnet, and retighten the Screw.
Then, plug in the power adapter and turn the Large
Pulley (21) for a moment. Repeat these actions, if
necessary, until the console displays correct feedback.
Then, reattach the lower rear shield cover.
101
101
101
68
113
116
104
21