Professional ultrasonic nebuliser
15
11:25
10:00
How to prepare before inhalation
8.
Attaching the inhalation hose
Attach the inhalation hose to the medication cup cover
. Approximately 10mm of the hose length should be
fitted over the adapter on the medication cup cover.
Conect cable running from heating tube to socket on
the rear side of unit.
9.
Plugging the nebuliser into the electrical outlet
Make sure that the power button
is in the OFF/0
position. If the power cord is not attached, insert it
fully in the socket of the nebuliser and plug it into
an electrical outlet.
Note:
Mains socket outlet used for connection of the
control unit to the mains shall be easily reachable to
the operator.
10. Turning the nebuliser on
Turn on the power button . The main page will appear
on the screen in a few seconds after intro duction.
The initial length of inhalation time is 10 minutes as set
by the manufacturer as well as the minimal values of
the air-flow volume and the nebulisation rate.
11. View of the LCD display
Setting the duration of
inhalation (in minutes)
Setting the air-flow
volume
Setting the nebulisation
rate
Setting the heating
level
Setting the inhalation
start time
Opening the setting
menu
Set buttons
Inhalation START/STOP
button
Current time or starting inhalation time
