Moog Components Group
4 Port 10/100/1000 Mbps Ethernet Switch
February 23, 2009
(201640-xxx)
Page 6 of 13
D9 (Green)
Labeled ‘3.3V’, surface mount, located in the middle of the bottom edge of the
board. When ‘ON’ indicates the on-board 5V to 3.3V converter is operational
D10 (Green)
Labeled ‘5V’, surface mount, located in the lower right corner of the board. When
‘ON’ ind5V dc is available to the board
D11(Green)
RS-485 Diagnostics Tx Data. Illuminated with traffic being transmitted from the
board on the serial diagnostics port.
D12 (Green)
RS-485 Diagnostics Rx Data. Illuminated with traffic being received into the
board on the serial diagnostics port.
Port 1 Left
(Green/Orange)
Port 1 Ethernet SPEED LED. This LED will be illuminated GREEN if Port 1 is
communicating at 1000Mbps and ORANGE if the port is communicating at
100Mbps. If this LED is not illuminated but the LINK LED is lit, the port is
communicating at 10Mbps.
Port 1 Right
(Green)
Port 1 Ethernet LINK LED. This LED will be illuminated GREEN if a valid
Ethernet device is connected to the port. This LED will flash as data traffic is
transmitted through the port.
Port 2 Left
(Green/Orange)
Port 2 Ethernet SPEED LED. This LED will be illuminated GREEN if Port 2 is
communicating at 1000Mbps and ORANGE if the port is communicating at
100Mbps. If this LED is not illuminated but the LINK LED is lit, the port is
communicating at 10Mbps.
Port 2 Right
(Green)
Port 2 Ethernet LINK LED. This LED will be illuminated GREEN if a valid
Ethernet device is connected to the port. This LED will flash as data traffic is
transmitted through the port.
Port 3 Left
(Green/Orange)
Port 3 Ethernet SPEED LED. This LED will be illuminated GREEN if Port 3 is
communicating at 1000Mbps and ORANGE if the port is communicating at
100Mbps. If this LED is not illuminated but the LINK LED is lit, the port is
communicating at 10Mbps.
Port 3 Right
(Green)
Port 3 Ethernet LINK LED. This LED will be illuminated GREEN if a valid
Ethernet device is connected to the port. This LED will flash as data traffic is
transmitted through the port.
Port 4 Left
(Green/Orange)
Port 4 Ethernet SPEED LED. This LED will be illuminated GREEN if Port 4 is
communicating at 1000Mbps and ORANGE if the port is communicating at
100Mbps. If this LED is not illuminated but the LINK LED is lit, the port is
communicating at 10Mbps.
Port 4 Right
(Green)
Port 4 Ethernet LINK LED. This LED will be illuminated GREEN if a valid
Ethernet device is connected to the port. This LED will flash as data traffic is
transmitted through the port.
