4
Direct Flow R.O. Systems Benefits:
Powerful booster pump and high-production R.O. membrane make it possible to build a high-
end direct flow R.O. machine that offers high performance and water quality.
■
Freshness of water filtered in real time. No more stale water from a room temperature tank.
■
Virtually unlimited filtered water production. While conventional systems with tanks are
limited by the tank capacity, and require prolonged timeouts to refill the tank, a direct flow
system is limited by the membrane filtration rate only.
■
Better water purification quality due to improved contaminant rejection rate.
■
Typically, up to three times less water is wasted per gallon of filtered water, compared to
the conventional tank and water storage systems, this is due to the much higher efficiency
(recovery) rate. Saves you money and Planet Earth’s water resources!
■
Lower cost of ownership due to prolonged service life of pre-filters and membrane, which
is in turn a result of higher efficiency rate: less water is treated overall by pre-filters and
the membrane for each gallon of permeate produced. This saves the capacity of pre-filters
and ensures either less frequent change necessity or better purification.
■
Less number of components leads to better reliability.
How It Works:
The heart of P500 water dispenser is a direct
flow reverse osmosis multi-stage water filtra-
tion unit. Water supply is done through the in-
let valve, waste water is drained through the
drain saddle, and filtered water delivered to
water taps through heater and cooler. Detailed
connection scheme is shown on the following
charts.
After installation, you will get clean hot or cold
water by simply pushing the taps. The pump
will turn on automatically and will produce fil-
tered water in real time until the heater and
cooler are full, and then the system will shut
off automatically. Regular 18-seconds auto-
flush protects membrane from scale and de-
bris build-up.
