10
2. Install drain saddle.
The square foam gasket with a circle cut out must be applied to the inside of the drain sad-
dle. Remove sticky tape backing and stick to the drain saddle as shown.
Drill a ¼” hole in the drain pipe
above the trap and on the verti-
cal or horizontal ta l piece. Locate
the drain connection away from
the garbage disposal to prevent
potential contamination and sys-
tem fouling. It’s recommended to
install optional check valve on the
drainage line. It works as a sewer
backup valve in this case.
3. Remove gags and connect tubes as follows. See the connection chart for details.
■
Insert water supply tubing from inlet valve adapter into the “inlet” fit-
ting of the dispenser.
■
Insert the waste tubing from the “drain” fitting of the dispenser into
the drain saddle (through the union check valve on the way) or to
a waste water collection container. Install the check valve with the
arrow in the direction of flow.
i
mount drain
saddle here
never
mount
here
never mount
here
