13
To change filter(s) or membrane:
тр ль ый выход ой п трубок обр т оос от ч ской
бр ы д в тся угловой обр т ый кл п
боковой выход ой п трубок д в тся ф т г который со д я тся с выходо воды КО ЦЕ
ON
OFF
ON
OFF
■
switch off heater
and cooler
■
shut off the inlet
valve
■
unplug the dis-
penser from the
electrical outlet
■
open the dispenser’s front cover pulling it down
■
locate the filter (membrane) to be changed, disconnect its inlet and outlet fittings and
remove it
Note: Remove and change back one filter at a time, one after another. Do not remove all filters
at once to avoid mixing up the tubes.
To change membrane and post-filter it is nessesary to remove supporting bracket. For this
disconnect inlet and outlet fittings first.
Pre-filters could be changed without bracket removing.
■
take new filter (membrane) and install it
in the place of the removed one observ-
ing the water flow direction arrow on its
label and restoring the connections (see
the internal connections chart for details)
K871
K870
K880
K858
