16
AFTER SALES SUPPORT AU 1300 777 137 NZ 0800 824 556 [email protected]
Timer Operation
The Air Conditioner has a 24 hour timer, which you can set to start the unit at a
later time, or to switch Off the unit automatically.
On-Timer Setting
Ensure the Air Conditioner is connected to a power outlet (and switched on), but
the unit turned Off (in standby mode and not operating). Press the TIMER button
and the TIMER indicator light will illuminate to confirm the timer is ready for use. The
operation panel will now display (01), which is 1 hour. This is the number of hours
before the Air Conditioner will automatically turn On. Select the desired number
of hours to pass before you want the Air Conditioner to automatically turn On, by
using the UP and DOWN buttons. Once you have made your selection, press the
TIMER button again to confirm the selected time and to start the timer countdown.
You are able to program a time for the Air Conditioner to turn on at anytime
between 01-24 hours. To deactivate the timer, press the TIMER button until the TIMER
indicator light turns off.
Off-Timer Setting
With the Air Conditioner turned On and operating, press the TIMER button and
the TIMER indicator light will illuminate to confirm the timer is ready for use. The
operation panel will now display (01), which is 1 hour. This is the number of hours
before the Air Conditioner will automatically turn Off. Select the desired number
of hours to pass before you want the Air Conditioner to automatically turn Off, by
using the UP and DOWN buttons. Once you have made your selection, press the
TIMER button again to confirm the selected time and to start the timer countdown.
You are able to program a time for the Air Conditioner to turn off at anytime
between 01-24hrs. To deactivate the timer, press the TIMER button until the TIMER
indicator light turns off.
Water Full Alarm
Water that forms as condensation during cooling will
drop into an in-built drip tray. When the water level in the
drip tray is getting full, an automatic water level sensor
illuminates the water full indicator on the control panel to
alert you that the drip tray needs to be emptied.
Should the water full indicator light up during operation,
follow the steps below:
• Place a pan under the water drainage outlet at the
bottom of the unit. Alternatively, attach a water drain
hose (not supplied) to the drainage outlet (Fig. 8).
Using Your Portable Air Conditioner (cont)
Fig. 8
