![Prinetti IA5036 Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/prinetti/ia5036/ia5036_instruction-manual_1603105015.webp)
15
AFTER SALES SUPPORT AU 1300 777 137 NZ 0800 824 556 [email protected]
Using Your Portable Air Conditioner (cont)
Switching On/Off
After switching On, allow 30 seconds for cool air to flow through the louvres.
Avoid starting the Air Conditioner within 3 minutes after switching it Off, and avoid
switching it Off within 3 minutes after switching it On.
Cooling Mode
Press the MODE button until the cooling mode indicator illuminates.
Press the DOWN (-) or UP (+) button repeatedly to set the desired room
temperature between 16°C and 31°C.
NOTE:
If the current temperature in the room is lower than the temperature
selected, the Air Conditioner will not begin cooling until the temperature in the
room rises above the set temperature.
NOTE:
The Air Conditioner has a built-in thermostat and will cycle Off and On
depending upon the ambient temperature of the room. This is NOT a product fault.
Fan Speed Selection
Press the SPEED button to select the fan speed: High or Low.
NOTE: For best cooling efficiency, make sure that:
• Curtains/blinds are closed if your room is directly exposed to the sun.
• The Air Conditioner is located away from any heat source.
Dehumidifying Mode
Press the MODE button until the dehumidifying mode indicator illuminates.
The unit will automatically set the fan to Low speed and maintain the room
temperature at 2°C lower than the current room temperature (within the 16°C to
31°C range).
This removes excess moisture from the air leaving it feeling fresher and less humid.
Fan Mode
Press the MODE button until the fan mode indicator illuminates.
Press the SPEED button to select the fan speed: High or Low.
NOTE:
In Fan Mode, only the fan will operate to circulate air. There will be no
cooling effect.