Princeton Instruments NIRvana-LN, Руководство пользователя, Страница: 11 / 122

Chapter 1 About this Manual 11
•
Appendix D, WinX/LightField Cross Reference
Includes two alphabetically sorted tables (WinX to LightField and LightField to
WinX) that cross reference terms used in the two applications.
•
Warranty and Service
Provides the Princeton Instruments warranty and customer support contact
information.
1.4 Conventions Used in this Manual
The following conventions are used throughout this manual:
•
WinSpec/32 and LightField
®
typically use different terms for the same functions or
parameters. Unless a topic is specifically for WinSpec/32 or LightField, the
following conventions are used:
—
Curly brackets { } are used to denote a LightField term or location.
—
When information applies to both WinSpec/32 and LightField, the WinSpec/32
term will be listed first, followed by the LightField term surrounded by curly
brackets.
For example:
Pre Open
{
Open Before Trigger
}
—
When a location for setting a parameter is mentioned, the WinSpec/32 location
will be listed first, followed by the LightField location surrounded by curly
brackets.
For example:
Exposure Time
is configured on the
Experiment Setup|Main
tab
{
Common Acquisition Settings
expander}.
1.5 Safety Related Symbols Used in this Manual
CAUTION!
!
The use of this symbol on equipment indicates that one or more
nearby items should not be operated without first consulting the
manual. The same symbol appears in the manual adjacent to the
text that discusses the hardware item(s) in question.
WARNING! RISK OF ELECTRIC SHOCK!
The use of this symbol on equipment indicates that one or more
nearby items pose an electric shock hazard and should be
regarded as potentially dangerous. This same symbol appears
in the manual adjacent to the text that discusses the hardware
item(s) in question.
1.5.1 Grounding and Safety
Before turning on the power supply, the ground prong of the power cord plug must be
properly connected to the ground connector of the wall outlet. The wall outlet must have a
third prong, or must be properly connected to an adapter that complies with these safety
requirements.